Heating setting box

From Livingcontrol.co.uk
Revision as of 10:11, 4 June 2011 by Martin Hogbin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page describes how to use the RoomBox NT PC configuration software to set up heating control in a zone.

Config Box

Room Number

Set this to the room number used in the heating system to control that zone. By default this is set to the zone number.

In Sensible Heat systems, room numbers 1-99 are normally used. These control page 2 of the Sensible heat control system. For large systems, further rooms may be set on page 12 of the system. To use these, add 100 to the room number, thus room 6 on page 12 is entered as room 112

Port Number

Set this to the RoomBox NT com port you wish to connect to the Sensible Heat controller.